New Site Redirect

Thursday, July 31, 2014

Vancouver Festival of Lights

Did you know that Lean Sensei president is an avid photographer?

The photos below were taken by our very own David Chao from his boat.



Monday, July 28, 2014

Takumi: Striving for Mastery and Lifelong Learning

One of the most important of the five key principles of lean thinking is Continuously Improve and Drive Towards Perfection. This principle of forever raising the bar (or standard) and striving for perfection is clearly illustrated in the celebrated documentary film “Jiro Dreams of Sushi”, which follows 85 year old sushi master Sukibayashi Jiro and his never ending push to improve even at his age. This story has been ‘doing the rounds’ at LSI, as we have been trying to get as many Lean practitioners as possible to check it out.

Jiro-san is a Takumi – a master at his craft. We recently met another type of takumi on our Japan Lean Tour but this time in the automotive industry. Although they were from an entirely different profession from that of a famous sushi chef, these takumi also embody the key principle of continuous improvement and lifelong learning that Jiro-san lives by.

One of the highlights of LSI’s Lean Japan Tour is a trip to Nissan Yokohama’s engine plant.  The plant tour is always highly rated. It includes a full tour of the working plant featuring many great examples of Lean manufacturing, a guided tour of an engine museum and even a look at the first ever Datsun (the ‘former’ name for Nissan and recently revived sub-brand) vehicle ever produced. 

All this is great, but hands down the most popular part of the tour is the special opportunity to visit the GT-R engine cleanroom, where participants have the rare opportunity to see and often to meet
face- to- face with the Nissan takumi – the Master craftsmen of the GT-R VR-38 engines.
First of all, the car: The GT-R is considered one of the most widely recognized and awarded sports cars of its time, winning such distinctions as Top Gear Supercarof the Year in 2007, Motor Trend car of the year in 2009 as well as being more recently recognized as having one of the best resale values of any sports car.  Each GT-R, capable of 545 horsepower, contains a twin-turbocharged V6 engine, which was hand built by one of the Nissan engine plant takumi.

At last count there were only four certified takumi master craftsmen at the Nissan facility – just four men out of thousands who possess the talent and skill to build these high performance engines by hand. In fact, many of the activities requiring high precision, such as valve clearance are done entirely by feel – a skill that the takumi are able to utilize with their own sense of touch.

Takumi is a word that Lean Sensei also associates with its Lean Blackbelt program, as an invitation to strive for perfection – and the name is not chosen lightly. Those who are set on becoming Lean Blackbelt certified are invited to learn to become lean leaders who can take on cross-corporate challenges. Only through repeated practice and refinement can a Blackbelt aspire to become a true takumi which is finally the attainment of Master Blackbelt status.
nissan_engine plate

To better understand the level of mastery required to become a takumi at Nissan, I recently spoke to the leader of the Nissan GT-R engine takumi, Kurosawa-san, at Nissan’s Yokohama facility when we were lucky enough to meet him during our Japan Lean Tour. Kurosawa-san has the unique distinction of being a takumi with the name “Takumi” which is a different Chinese character, but it is pronounced the same way as the word for Master.  So, we got to meet with Takumi Takumi!
As leader of the Nissan takumi team, Takumi Kurosawa assembles GT-R engines as well as super GT 300 engines for the race circuit. He informed us that the takumi are not only responsible for the assembly, but also for guaranteeing the precision of the engine parts and their quality. 

Kurosawa-san has welcomed many guests who have come from all over the world to view the cleanroom up close, including GT-R owners who want to meet the person who hand-built the engine for their very own car. Past visitors have included Jay Leno and other celebrities, not to mention a lot of Lean Sensei Blackbelt candidates along the way. 

The first thing that struck us when we met Kurosawa-san was his enthusiasm for the work – he is obviously passionate about his craft and enjoys talking about the painstaking work that goes into each engine assembly. Each unit takes approximately 6 hours, involves nearly 400 different parts and is built entirely by one takumi from start to finish.

Even more impressive than his vast knowledge and skill was Kurosawa-san’s modest nature. At one point, one of the Blackbelt candidates asked him how many years of training it took to reach takumi status. “I am always learning, always training” was his response. In other words, although it takes a great deal of skill to reach the level of the takumi, it also takes the right attitude – one of relentlessly pursuing mastery and perfection…while never actually getting there.  Keep on driving towards perfection!

-Coach Jake

Sign-up for our quarterly newsletter to get free lean tips like the above article.

Wednesday, July 16, 2014

Lean 101 for BC Food Producers Association

Great session today with BC Food Producers' Association.
This was a special session exclusively for this group. James Donaldson, CEO made a special appearance today too.

Ice breakers and team building

Contact to set-up Lean 101 customized for your group.

Friday, July 11, 2014

Congratulations Summer Hybrid Class!

Today, our summer Greenbelt class graduated. It was a wonderful celebration with sponsors cheering on their candidates who not only learned many useful lean tools, but also transformed as individuals. One Greenbelt even credited the program for becoming more organized in their personal life.

With sponsors

Organizations often send at least two candidates to a session so that the candidates can support each other and hold each other accountable during and after Greenbelt Mugen certification

Each class we select three medal winners- individuals who demonstrated passion and excelled during the kaizens, homework projects and on the final exam.
This session's Bronze medallist is Marvin 
Silver medallist, Xochitl
 And finally, our Gold medallist, Susan!

Congratulations! You are now the leaders of lean in your organization. Though today was the end of the program, it is just the beginning of your lean journey.

Thursday, July 10, 2014

Summer Savings

Lean Sensei's public Summer Greenbelt Mugen is not the only class making things happen this week. Jake is out on the island coaching an in-house program. Looking at the excitement and dedication, you can tell that the organization has internalized their learnings from module 1 and are clear into the heart of module 2 of  this 3 module project.

Lean projects create the opportunity to actually discuss issues

Team building!

Mapping out the process to determine where the waste is

Call 604-264-1000 or email for more information on attending the last public Greenbelt sessions of the year, or on options for in-house coaching by Lean Sensei's qualified coaches.

Wednesday, July 9, 2014

What Makes a Good Leader?

If you've saw the article that was posted on LinkedIn entitled "The Best Leaders Do.. Nothing" you might have been puzzled/intrigued by the title. Effective leaders lead rather than micromanage. The leader's role is to always have a hand on the pulse of the organization but have a full picture view. The primary "doers" are the employees entrusted to do their part to improving the organization while developing themselves.

This philosophy is parallel to Lean Sensei's underlying goal in our lean certification programs. The Greenbelt Mugen Certification equip employees to teach, facilitate, lead and implement lean activities. The program also requires the participant to develop vital leadership skills as Greenbelts become the leaders of lean within the organization.

This week is the last week of our Summer Hybrid Greenbelt Mugen program and then another group of lean leaders will be graduated! The week will wrap up with final presentations and final exams. And then of course, we will celebrate properly.

If you are curious about lean and our programs, contact us at or 604-264-1000. You can take a guest seat at this Greenbelt's closing ceremonies.

Wednesday, July 2, 2014

Happy Birthday Canada!

We love our country! We operate globally with Executive courses and projects in Europe, Asia and North America; Greenbelt in Vancouver, Calgary/Edmonton, Toronto and in the US, Tulsa and Orlando... But our heart is always thinking of home.

We hope you had a fun and restful Canada day!